<var id="fvvt3"><ruby id="fvvt3"><noframes id="fvvt3">
<listing id="fvvt3"></listing>
<th id="fvvt3"></th>
<var id="fvvt3"><span id="fvvt3"></span></var>
Make HomePage | Add To Favorites  |  中文簡體
You are here:Home>> Technical support
Technical support

The tool setter used in cnc machine
Date:2015-09-24 09:52

Tool setters can be used to detect wear and breakage and correct thermal distortion as well as to preset tool length.


1.Maintaining high machining accuracy of CNC machining centers!

Corrected tool wear caused by cutting and thermal displacement of the tool length due to differences between daytime and nighttime temperatures by a precision of 1μm.

Machining accuracy will be always maintained within tolerance.


2.Improve productivity by enhancing net working rate of machine tools.

Detect accidental tool breakage in machining process, and stop the machine.

Increase productivity and net working rate by avoiding machining problems in nightlong unmanned operation.

3.Prevent defective products.

When the blade is pressed against the contact, high-accuracy signal is output to the CNC or PC. 


It is no longer necessary to repeat the process of trial grinding, measurement calculation, and input to the CNC, thereby eliminating the need for expertise in tool setting while also eliminating any concern over damaging the machine due to setting errors.


Back to Technical support
About Us | Feedback | Distribution to join | Down | Contact Us



Contact phone: 0086-755-29925965 fax number: 0086-755-29925965 contact: Gina Liu, email:hncsales1@aliyun.com  

Address:5th floor 85# building, Jia an village, Bao an 7th district, Shenzhen, China  postcode:518101

CopyRight © 2010 123456. com All Rights Reserved. The company All Rights Reserved

Support:Website | zk71  | Manage